Are All Skateboard Trucks The Same Size – Skateboard Cast


You own a skateboard and are familiar with your trucks and their functions.  The trucks on the skateboard are pretty significant in terms of how your skateboard rides and functions. However, are all skateboard trucks the same size?

The trucks should always be the same width as your skateboard, which means their sizes are not standardized. They mustn’t be considerably broader than the deck; otherwise, the center of gravity will move to the deck’s side. 

This feature may have an impact on flip tricks as well as the overall feel of the board. So let’s dive into this article to know more!

Are All Skateboard Trucks The Same Size?

Are All Skateboard Trucks The Same Size

One of the most crucial considerations a skater must make is which trucks to use. Unfortunately, sorting through various sizes and characteristics to find what you are searching for isn’t always straightforward, especially for novices. 

But don’t be alarmed! Learn the differences between low, standard, and high trucks in this article.

The Width Of Truck

The size of a skate truck is determined by measuring the axle width and the inner width. Therefore, your Skateboard’s trucks must always be the same width as your Skateboard. 

They mustn’t be considerably broader than the deck; therefore, the center of gravity will move to the deck’s side. This feature has an impact on flip tricks as well as the overall feel of the board. 

It is not an issue if the deck is a little broader than your vehicles. Their hanger width usually classifies skateboard trucks. Because vendor data on the size of they may be unclear, it’s probably better to concentrate on the axle width.

They, however, do not come in conventional sizes. As a result, minor differences might occur throughout the production process since the width dimensions are generally rounded. 

As a result, slight variations are pretty typical. Below you’ll discover additional advice on the best skateboard truck manufacturers.

The Height Of Trucks

See more: how tight should my skateboard trucks be

The distinction between high and low types appears to be insignificant. However, as is so frequently the case, the finer points are essential. It all comes down to the body height and, more significantly, the wheel size. 

When releasing the tail, the taller the truck, the more you must push it down. In this case, your deck works as a lift, and its angle will be significantly steeper due to the long distance the deck’s tail must travel before it strikes the ground. 

As a result, greater pop-offs may be conceivable. Taller individuals may find higher trucks valuable since the tail may be brought to the ground fast with enough strength and long legs.

Small skaters may struggle with a lofty setup, so youngsters, in particular, should adhere to low trucks. Tall riders may ride low trucks as well. Then there are “rapid snaps,” which are pop-offs that happen quickly. 

Regrettably, no industry standard exists for the actual height of the different size labels used by truck manufacturers. That implies that vehicles labeled as “high” by various manufacturers are not always the same height. 

Low Trucks

Low trucks are just that: they’re low. As a result, the skateboard deck is closer to the ground, allowing for more secure deck handling. Furthermore, low-riding vehicles are lighter. 

However, on softer ground and dirty landings, the danger of wheel scratches is rather significant. As a result, you must use tiny wheels (50-51 mm) or riser pads and shock to avoid wheel biting on low trucks.

Mid Trucks

Mid or regular-type mix high and low type, making them excellent for everyone skating and those who can’t make up their minds. Skateboard wheels with a diameter of 52 mm to 56 mm work well with mid/standard type.

High Trucks

High types are, as the name implies, “high.” That is to say; you are slightly higher from the ground. When squeezing, the board seems to have a steeper slope, enabling you to slide higher. 

The possibility of wheel scratches is also reduced. High type, however, is heavier, and because of the trucks’ steeper angle when turning, the board might be relatively unstable. 

Therefore, all skateboard wheels are suited for high trucks. For bigger wheels (57–59mm), riser pads or shock should be installed for safety.

The height of a truck is calculated from the bottom plate to the axle’s center. This measurement matches the distance from the truck to your deck and indicates how high the board will be on the ground.

Recommended Wheels For The Trucks

Are All Skateboard Trucks The Same Size

If you are still unsure how big your trucks’ wheels can be, we have put up a table with the suggested maximum size for high, medium, and low types. Again, these suggestions are simply suggestions and should only be used as a starting point. 

Truck Type Truck Height Recommended Wheel Sizes
Low 46 mm 51 mm
47 mm 52 mm
48 mm 52 mm
Mid 50 mm 56 mm
52 mm 60 mm
High 53.5 mm 62 mm
55 mm 63 mm
56 mm 64 mm

Notice that our optimum wheel and truck size guidelines are based on tight trucks. Remember that when you skate, your trucks loose, the chance of wheel bites increases. 

When discussing optimum wheel size, we are talking about the truck’s ability to accommodate such large wheels. If you are not intending on building a cruiser, the wheels shouldn’t be more significant than 60 mm millimeters.

You can rely on this video to better understand what size skateboard trucks are.

What Size Skateboard Trucks? | Skateboard Buying Guide | Tactics

Final Thoughts 

A well-built truck will provide you with stability and enable you to grind through obstacles once installed. Hangers, Axles, and Kingpins are all standard components inboard trucks. 

Hopefully, after reading this article, you can answer the question: are all skateboard trucks the same size? The sizes vary depending on your skating style, the wheel size and board size, and the sorts of trucks you use.

If you are still unsatisfied with this, please refer to Skateboard Cast to choose yourself an ideal skateboard and related stuff. 

Thanks for reading!

Related posts: how to clean your wheels on a skateboard

How are skateboard trucks measured? Things to know

Rate this post

William Daniel

Hey, I am William Daniel and I greet you warmly to my site Skateboard Cast. I am a huge fan of skateboards and I love skateboarding. I have created this blog to help you get your first skateboard and start ruling the streets or parks with your moves. All the content on this blog is written by me after deep research through personal experience. I will try my best to cover all the topics in as much detail as possible

Related Articles

Back to top button